C.Scope SGV4 Signal Generator
CLOSEEnquire about this product
Hire This Product
Product Servicing
Enquire about this course
Send us your questions about this product and we will endeavour to get back to you as soon as possible!
If you’re look to hire one of our products, simply fill out this form with your full requirements and we’ll get back to you regarding a quotation.
Take advantage of our on-site repair and calibration service; simply fill out this form and we will get back to you as soon as possible!
C.Scope SGV4 Signal Generator
Call for Price
£0.00 inc VAT
C.Scope SGV4 Signal Generator
Designed for use with a CXL4 or DXL4 cable avoidance tool, this C.Scope SGV4 signal generator enables the user to safely detect underground cables and piping.
Its simultaneous 33kHz and 131kHz signal output is perfect for detecting buried services, preventing any hazardous cable strikes when excavating.
The dual frequency signal can be applied without direct connection, using either a signal clamp or induction method.
Key Features
- One Watt 4-Level adjustable Power Output
- Simultaneous 33+131kHz Signal
- Pulsed or Continuous Output Signal
- Three Signal Application Techniques:
Direct Connection / Wraparound / Induction - Automatic Daily Self Test
- Data Logging of all Signal Generator activity
- Data Transfer by USB
- High Resolution Backlit Liquid Crystal Display
- No periodic Calibration required
- Product Validation Certificate available
- In-build Accessory Tray
- Network Rail Approved
To find out what other cable detection equipment we supply, including thermal imaging cameras, click here.
Specification
Controls
All operation is by push button control as follows:
- On/Off
- Power Level: 4 available power levels via Increase and Decrease Power buttons
- Pulse/Continuous Output: toggles between pulse or continuous output using one push button
- Audio Output: toggles between loud, muted and silent audio output using one push button
Audio Indications
- Audio Feedback on button push
- Audio pitch drops with increasing load current in Connected Mode
- Audio pitch changes with power level in Induced Mode
- Audio output pulses to indicate Pulsed Mode
- Low battery indicated by interrupted Audio and output signal
Visual Indication
Multi-segment Liquid Crystal Display indicating:
- Output Frequency
- Pulse Mode
- Continuous Mode
- Battery Condition
- Output Level (bargraph)
- Speaker Mute
- Self Test Result
Data Connector
Standard USB Mini B connector. USB 2.0 Compatible
Self Test
Automatic Daily Self Test and manual Self Test function
Output
- Induced = 131,072Hz and 32,768Hz
- Connected = 131,072Hz and 32,768Hz
- Carrier Pulse Frequency: 7.5Hz (pulsed mode)
Connected Mode
- Connection Mode automatically selected when lead is plugged into socket
- Maximum Output Voltage (open circuit): 28V rms
- Maximum Output Current (short circuit): 65mA rms
- Maximum Power: 1W into 400Ω load
Construction
- Case moulded from high impact plastic
- Designed to withstand 1m (3’3”) drop onto a hard surface
- Incorporates clip on accessory storage compartment
Weight (including batteries, Connection Leads and Earth Stake
3.4kg (7 lb 7 oz)
Dimensions (with Accessory Tray fitted)
360mm x 180mm x 230mm (14.1” x 7” x 9”)
Battery Type
Internal 4 x ‘D’ (LR20) cells (either alkaline non-rechargeable or NiMH rechargeable)
Battery Life
Up to 40 hours intermittent use at 20ºC (68ºF) using alkaline cells
IP Rating
65
Network Rail Approved
We are committed to offering the best products, at the very best rates on the market. If you can find a better offer, we will endeavour to not only match, but beat it!
To Find out more about our policy and to see how you would qualify for our price promise, click here.
