Rae Systems MiniRAE 3000 Detection Monitor

Description

Whether you’re working in industrial hygiene, leak detection, or HazMat response, the MiniRAE 3000+ offers some of the most advanced VOC monitoring capabilities on the market. Equipped with a photoionisation detector (PID) boasting an extended detection range of 0–15,000 ppm and a lightning-fast three-second response time, this device is built for performance. It features built-in correction factors for over 200 compounds, patented auto-cleaning sensor technology, and cutting-edge Reflex PID Technology™, allowing it to detect some of the highest levels of ionisable chemicals available today.

Its powerful sampling pump can pull air through up to 100 feet of tubing, whether positioned vertically or horizontally, making it highly versatile in the field. A built-in flashlight and an IP65/67-rated dust-tight and waterproof housing ensure it stands up to tough environments and low-light conditions.

Specifications

Size	10” L x 3.0” W x 2.5” H (25.5 cm x 7.6 cm x 6.4 cm)
Weight	26 oz (738 g)
Sensors	Photoionization sensor with standard 10.6 eV or optional 9.8 eV or 11.7 eV lamp
Battery	• Rechargeable, external field-replaceable Lithium-Ion battery pack • Alkaline battery adapter
Running time	16 hours of operation (12 hours with alkaline battery adapter)
Display Graphic	4 lines, 28 x 43 mm, with LED backlight for enhanced display readability
Keypad	1 operation and 2 programming keys, 1 flashlight on/off
Direct Readout	Instantaneous reading • VOCs as ppm by volume (mg/m3) • High values • STEL and TWA • Battery and shutdown voltage • Date, time, temperature
Alarms	95dB at 12” (30 cm) buzzer and flashing red LED to indicate exceeded preset limits • High: 3 beeps and flashes per second • Low: 2 beeps and flashes per second • STEL and TWA: 1 beep and flash per second • Alarms latching with manual override or automatic reset • Additional diagnostic alarm and display message for low battery and pump stall
EMC/RFI	Compliant with EMC directive (2004/108/EC) EMI and ESD test: 100MHz to 1GHz 30V/m, no alarm Contact: ±4kV Air: ±8kV, no alarm
IP Rating	• IP-67 unit off and without flexible probe • IP-65 unit running
Datalogging	Standard 6 months at one-minute intervals
Calibration	Two-point or three-point calibration for zero and span. Reflex PID TechnologyTM Calibration memory for 8 calibration gases, alarm limits, span values and calibration dates
Sampling Pump	• Internal, integrated flow rate at 500 cc/mn • Sample from 100’ (30m) horizontally or vertically
Low Flow Alarm	Auto pump shutoff at low-flow condition
Communication & Data Download	• Download data and upload instrument set-up from PC through charging cradle or using BLE module and dedicated APP • Wireless data transmission through built-in RF modem
Wireless Network	Mesh RAE Systems Dedicated Wireless Network
Wireless Range (Typical)	Up to 15ft (5m) for BLE EchoView Host: LOS > 660 ft (200 m) ProRAE Guardian & RAEMesh Reader: LOS > 660 ft (200 m) ProRAE Guardian & RAELink3 Mesh: LOS > 330 ft (100 m)
Safety Certifications	US and Canada: CSA, Classified as Intrinsically Safe for use in Class I, Division 1 Groups A, B, C, D Europe: ATEX II 2G EEx ia IIC T4
Temperature	-4° to 122° F (-20° to 50° C)
Humidity	0% to 95% relative humidity (non-condensing)
Attachments	Durable bright yellow rubber boot
Warranty	3 years for 10.6 eV lamp, 1 year for pump, battery, sensor and instrument
Wireless Frequency	ISM license-free band. IEEE 802.15.4 Sub 1GHz
Wireless Approvals	FCC Part 15, CE R&TTE, Others
Radio Module	Supports BLE or Bluetooth or RM900

Sensor Range

Gas Monitor	Range	Resolution	Response Time T90
VOCs	0 to 999.9 ppm 1,000 to 15,000 ppm	0.1 ppm 1 ppm	< 3 s < 3 s

Select Gas Detector

Brand -

Gas -

Rae Systems MiniRAE 3000 Gas Monitor (PGM-7320)

Description

Specifications

Sensor Range

Select Gas Detector

Brand -

Gas -

Rae Systems MiniRAE 3000 Gas Monitor (PGM-7320)

Description

Specifications

Sensor Range

Enquire about this product