Rae Systems MultiRAE Pro

Description

Its capability to wirelessly transmit real-time threat and alarm data to a central command station enhances visibility and situational awareness. Offering exceptional versatility, the MultiRAE Pro allows for the interchange of over 25 different sensors to detect a wide spectrum of hazards, including volatile organic compounds (VOCs), toxic gases, combustibles, oxygen levels, and gamma radiation.

Designed for ease of use and maintenance, it features a large display and readily replaceable sensors, pump, and battery. The device also incorporates five distinct alarms, including a man-down alert, ensuring a flexible and rapid response to incidents. Furthermore, it supports fully automatic bump testing and calibration with AutoRAE 2 and provides 5-way local and remote wireless alarms.

Certified to Mil-STD-810G standards and compatible with Honeywell Sotera™ Express for device management, it readily integrates with Motorola MOTOTRBO communication systems. This advanced monitor finds critical application in CBRNE scenarios, Hazmat response, indoor air quality assessments, urban search and rescue operations, and venue protection.

Specifications

SIZE	7.6″ H x 3.8″ W x 2.6″ D (193 x 96.5 x 66 mm)
WEIGHT	31 oz (880 g)
SENSORS	Over 25 intelligent interchangeable field-replaceable sensors including gamma radiation, ppb and ppm PID sensors for VOCs, electrochemical sensors for toxic gases and oxygen, combustible LEL and NDIR sensors, and CO2 NDIR sensor
BATTERY OPTIONS, RUNTIME5 AND RECHARGE TIME	– Rechargeable Li-ion (~12-hr. runtime, < 6-hr. recharge time) – Extended duration Li-ion (~18-hr. runtime, < 9-hr. recharge time) – Alkaline adapter with 4 x AA batteries (~6-hr. runtime)
DISPLAY	Monochrome graphical LCD display (128 x 160) with backlighting Automatic screen “flip” feature
DISPLAY READOUT	– Real-time reading of gas concentrations; PID measurement gas and correction factor; Man Down Alarm on/off; visual compliance indicator; battery status; datalogging on/off; wireless on/off and reception quality. – STEL, TWA, peak, and minimum values
KEYPAD BUTTONS	3 operation and programming keys (Mode, Y/+, and N/-)
SAMPLING	Built-in pump. Average flow rate: 250 cc/min. Auto shutoff in low-flow conditions
CALIBRATION	Automatic with AutoRAE 2 Test and Calibration System or manual
ALARMS	Wireless remote alarm notification; multi-tone audible (95 dB @ 30 cm), vibration, visible (flashing bright red LEDs), and on-screen indication of alarm conditions – Man Down Alarm with pre-alarm and real-time remote wireless notification
DATALOGGING	Continuous datalogging (6 months for 5 sensors at 1-minute intervals, 24/7) – User-configurable datalogging intervals (from 1 to 3,600 seconds)
COMMUNICATION AND DATA DOWNLOAD	– Data download and instrument set-up and upgrades on PC via desktop charging and PC comm. cradle, travel charger, or AutoRAE 2 Automatic Test and Calibration System – Wireless data and alarm status transmission via built-in RF modem (optional)
WIRELESS NETWORK	ProRAE Guardian Real-Time Wireless Safety System or EchoView Host-based Closed-Loop System
WIRELESS RANGE (TYPICAL)	MultiRAE Pro to RAELink3 [Z1] Mesh modem ~330 feet (100 meters) MultiRAE Pro to EchoView Host, RAEMesh Reader or RAEPoint ~660 feet (200 meters) MultiRAE Pro to Access Point ~ 330 feet (100 meters)
OPERATING TEMPERATURE	-4° to 122°F (-20° to 50°C)
HUMIDITY	0% to 95% relative humidity (non-condensing)
DUST AND WATER RESISTANCE	IP-65 ingress protection rating
SAFETY CERTIFICATIONS	CSA: Class I, Division 1, Groups A, B, C and D, T4 Class II, Division 1, Groups E, F, G T85°C ATEX: 0575 II 1G Ex ia IIC T4 Ga 2G Ex ia d IIC T4 Gb with IR Sensor installed I M1 Ex ia I Ma IECEx: Ex ia IIC T4 Ga Ex ia d IIC T4 Gb with IR Sensor installed I M1 Ex ia I Ma IECEx/ANZEx: Ex ia IIC T4 Ga Ex ia d IIC T4 Gb with IR Sensor installed Ex ia I Ma
EMI/RFI5	EMC directive: 2004/108/EC
PERFORMANCE TESTS	MIL-STD-810G and 461F compliant. LEL CSA C22.2 No. 152; ISA-12.13.01
WARRANTY	– Four years on Liq O2 sensors – Three years on CO and H2S sensors – Two years on non-consumable components and catalytic LEL sensors – One year on all other sensors, pump, battery, and other consumable parts
WIRELESS FREQUENCY	ISM license free band. IEEE 802.15.4 Sub 1GHz Wi-Fi 802.11 b/g
WIRELESS APPROVALS	FCC Part 15, CE R&TTE, Others
RADIO MODULE	Supports RM900A

Sensor Ranges

RADIATION SENSORS	RANGE	SENSOR TYPE
GAMMA	0 to 20,000 μRem/h (dose rate)	1cc CsI (Tl) scintillator with photodiode
PID SENSORS	RANGE	RESOLUTION
VOC 10.6 EV (EXT. RANGE) VOC 10.6 EV (PPB)	0 to 5,000 ppm 0 to 2,000 ppm	0.1 ppm 10 ppb
COMBUSTIBLE SENSORS	RANGE	RESOLUTION
CATALYTIC LEL NDIR (0-100% LEL METHANE) NDIR (0-100% VOL. METHANE)	0 to 100% LEL 0 to 100% LEL 0 to 100% Vol	1% LEL 1% LEL 0.1% Vol
CARBON DIOXIDE SENSOR	RANGE	RESOLUTION
CARBON DIOXIDE (CO2) NDIR	0 to 50,000 ppm	100 ppm
ELECTROCHEMICAL SENSORS	RANGE	RESOLUTION
AMMONIA (NH3)	0 to 100 ppm	1 ppm
CARBON MONOXIDE (CO)	0 to 500 ppm	1 ppm
CARBON MONOXIDE (CO), EXT. RANGE	0 to 2,000 ppm	10 ppm
CARBON MONOXIDE (CO), H2-COMP	0 to 2,000 ppm	10 ppm
CARBON MONOXIDE (CO) +	0 to 500 ppm	1 ppm
HYDROGEN SULFIDE (H2S) COMBO	0 to 200 ppm	0.1 ppm
CHLORINE (CL2)	0 to 50 ppm	0.1 ppm
CHLORINE DIOXIDE (CLO2)	0 to 1 ppm	0.03 ppm
ETHYLENE OXIDE (ETO-A)	0 to 100 ppm	0.5 ppm
ETHYLENE OXIDE (ETO-B)	0 to 10 ppm	0.1 ppm
FORMALDEHYDE (HCHO)	0 to 10 ppm	0.05 ppm
HYDROGEN CYANIDE (HCN)	0 to 50 ppm	0.5 ppm
HYDROGEN SULFIDE (H2S)	0 to 100 ppm	0.1 ppm
METHYL MERCAPTAN (CH3-SH)	0 to 10 ppm	0.1 ppm
NITRIC OXIDE (NO)	0 to 250 ppm	0.5 ppm
NITROGEN DIOXIDE (NO2)	0 to 20 ppm	0.1 ppm
OXYGEN (O2)	0 to 30% Vol	0.1% Vol.
OXYGEN (LIQ O2)	0 to 30% Vol.	0.1% Vol
PHOSPHINE (PH3)	0 to 20 ppm	0.1 ppm
PHOSPHINE (PH3 H)	0 to 20 ppm	0.1 ppm
SULFUR DIOXIDE (SO2)	0 to 20 ppm	0.1 ppm

Select Gas Detector

Brand -

Gas -

Rae Systems MultiRAE Pro

Description

Specifications

Sensor Ranges

Select Gas Detector

Brand -

Gas -

Rae Systems MultiRAE Pro

Description

Specifications

Sensor Ranges

Enquire about this product