Shop / Gas Detection / Portable Gas Detectors / Multi Gas Detectors / All Products / Industrial Scientific / Heptane Gas Detectors / Carbon Monoxide Gas Detectors / Ammonia Gas Detectors / Butane Gas Detectors / Chlorine Gas Detectors / Pentane Gas Detectors / Acetylene Gas Detectors / Hydrogen Gas Detectors / Oxygen Gas Detectors / Methane Gas Detectors / Propane Gas Detectors / Phosphine gas detectors / Sulphur Dioxide Gas Detectors / Chlorine Dioxide Gas Detectors / Hydrogen Cyanide Gas Detectors / Hydrogen Sulphide Gas Detectors / Nitrogen Dioxide Gas Detectors / Industrial Scientific GasBadge Pro Single Gas Detector

Brand -

  • Show more

Gas -

  • Show more
GasBadge Pro Single Gas Detector
SKU: 18100060-X

Industrial Scientific GasBadge Pro Single Gas Detector

SKU: 18100060-X

Receive a Quote Within 2 Hours Or Call 02920 759 683

Datasheet
Manual
Enquire About This Product
Request a Quote
Datasheet
Contact Us
Hire
Service
Install
Commission

Built to Industrial Scientific’s highest quality and reliability standards, the GasBadge Pro Single Gas Detector provides a lifetime of gas hazard protection with more features than any other single gas monitor available.

Categories: , , , , , , , , , , , , , , , , , , , , , Tags: ,

Description

GasBadge Pro Single Gas Detector

Interchangeable “smart” sensors enable the GasBadge Pro Single Gas Detector to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulphide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen.

Industrial Scientific GasBadge Pro communicates directly via optional accessories like the DS2 Docking Station™, iNet DS and Datalink to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings and data logging of up to one year of survey data are featured along with an event logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof moulding protects the unit from extreme abuse in a variety of harsh industrial environments. Its simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

For more information, get in contact via the contact us form or call 02920 759 683.

Specifications

INSTRUMENT WARRANTYGuaranteed for Life™ – Instrument is warranted for as long as supported by
Industrial Scientific Corporation (excluding sensors, batteries, and filters). CO,
H2S, and O2 sensors are warranted for 2 years. All other sensors warranted for
1 year
CASERugged, water-resistant polycarbonate shell with protective concussion-proof
overmold. RFI resistant.
DIMENSIONS9.4 x 5.08 x 2.79 mm (3.7 x 2 x 1.1 in )
WEIGHT85 g (3 oz)
SENSORSCO, H2S, O2, NO2, SO2,
NH3, CI2, CIO2, PH3, HCN, H2, CO/H2 Low
DISPLAYCustom LCD with graphical icons for easy use; Segmented display for direct gas readings; Backlight for low light conditions; “Go/No Go” display mode; Peak reading indication
ALARMSUser selectable low and high alarms
Ultra-bright LEDs, loud audible alarm (95 dB) and vibrating alarm
BATTERY RUN TIMEUser replaceable 3V, CR2 Lithium battery, 2,600 hour run time, typical
DATA LOGGING1 year continuous storage of data
EVENT LOGGERContinually on. Logs last 15 alarm events, stamping how long ago the event occurred, the duration of the event, and the peak reading seen during the event. Event-logger can be viewed on PC or printed directly from the instrument to an infrared printer.
TEMPERATURE RANGE-40 ºC to 60 ºC (-40 ºF to 140 ºF), typical
HUMIDITY RANGE0% to 99% RH (non-condensing), typical
IP RATINGThird-party certified IP64
CERTIFICATIONSANZEx: Ex ia I/IIC T4
ATEX: Ex ia I/Ex ia IIC T4; Equipment Group/Category I M1/II 1G
China Ex: Ex ia I/IIC T4
CMA: Ex ia I
CSA: Cl I, Gr A-D, T4; Ex ia IIC T4
KC: Ex ia I/IIC T4
IECEx: Ex ia I/IIC T4
INMETRO: Ex ia IIC T4
UL: Cl I, Div 1, Gr A-D, T4; Cl II, Gr E-G

Sensor Ranges

GasesRanges
CO0-1,500 ppm in 1 ppm increments
CO/H2 low0-1,500 ppm in 1 ppm increments
H2S0-500 ppm in 0.1 ppm increments
O20-30% by vol in 0.1% increments
NO20-150 ppm in 0.1 ppm increments
SO20-150 ppm in 0.1 ppm increments
NH30-500 ppm in 1 ppm increments
Cl20-100 ppm in 0.1 ppm increments
ClO20-1 ppm in 0.01 ppm increments
PH30-10 ppm in 0.01 ppm increments
HCN0-30 ppm in 0.1 ppm increments
H20-2,000 ppm in 1 ppm increments
Description

GasBadge Pro Single Gas Detector

Interchangeable "smart” sensors enable the GasBadge Pro Single Gas Detector to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulphide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen.

Industrial Scientific GasBadge Pro communicates directly via optional accessories like the DS2 Docking Station™, iNet DS and Datalink to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings and data logging of up to one year of survey data are featured along with an event logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof moulding protects the unit from extreme abuse in a variety of harsh industrial environments. Its simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

For more information, get in contact via the contact us form or call 02920 759 683.

Technical Specification
Size: 9.4mm x 5.08mm x 2.79mm
Weight: 85g
Gases: See chart below.
Battery: 2,600 hour run time
Temperatures (Operating): -40 to 60C
IP Rating: IP64
Approvals: CSA, IECEx, ATEX, ANZEx, CMA, KC, INMETRO, UL
Alarms: Visual, Audible, Vibrate
Data Storage: 1 Year Continuous
GasMeasuring RangeResolution
CO0-1500ppm1ppm
CO (H2 Low)0-1500ppm1ppm
H2S0-500ppm0.1ppm
O20-30% Vol0.1%
NO20-150ppm0.1ppm
SO20-150ppm0.1ppm
NH30-500ppm1ppm
CL20-100ppm0.1ppm
CIO20-1ppm0.01ppm
PH30-10ppm0.01ppm
HCN0-30ppm0.1ppm
H20-3000ppm1ppm

 

Downloads
Datasheet
Manual
FAQs
What gases can the GasBadge Pro Single Gas Detector detect?

The GasBadge Pro is configurable to monitor a variety of gases, including:

  • Oxygen (O₂)

  • Carbon Monoxide (CO)

  • Hydrogen Sulfide (H₂S)

  • Nitrogen Dioxide (NO₂)

  • Sulfur Dioxide (SO₂)

  • Chlorine (Cl₂)

  • Chlorine Dioxide (ClO₂)

  • Ammonia (NH₃)

  • Hydrogen Cyanide (HCN)

  • Phosphine (PH₃)

  • Ozone (O₃)

  • Hydrogen (H₂)

  • Hydrogen Chloride (HCl)

  • Hydrogen Fluoride (HF)

  • Ethylene Oxide (ETO)

  • Nitric Oxide (NO)

  • Mercury Vapor (Hg)​

What is the battery life of the GasBadge Pro Single Gas Detector?

The GasBadge Pro operates on a user-replaceable lithium battery, providing approximately 2,600 hours of continuous operation.​

Does the GasBadge Pro Single Gas Detector require regular calibration?

Yes. Industrial Scientific recommends performing a bump test before each day’s use and calibrating the instrument monthly to ensure accurate readings.​

What is a bump test, and how often should it be performed?

A bump test is a functional test where the detector is exposed to a known concentration of gas to verify that sensors and alarms are working properly. It should be performed before each day’s use.​

Accessories
Contact Us

Enquire about this product

Send us your questions about this product and we will endeavour to get back to you as soon as possible!

Product: Industrial Scientific GasBadge Pro Single Gas Detector