BW MicroClip XL Gas Detector

BW MicroClip XL Gas Detector

Call 02920 759 683 For Best Price
Download PDF

Enquire about this product

Hire This Product

Product Servicing

Enquire about this course

Send us your questions about this product and we will endeavour to get back to you as soon as possible!

If you’re look to hire one of our products, simply fill out this form with your full requirements and we’ll get back to you regarding a quotation.



Take advantage of our on-site repair and calibration service; simply fill out this form and we will get back to you as soon as possible!

BW GasAlertMicroClip XL Gas Detector

BW MicroClip XL Gas Detector

Call for Price

£0.00 inc VAT


The BW GasAlertMicroClip XL portable multi-gas detector can be configured to monitor combinations of Combustible gases such as LEL, Hydrogen Sulphide (H2S), Carbon Monoxide (CO) and Oxygen (O2).

Under the hood this gas detector is the same bestselling BW MicroClip but has been redesigned and rebranded as the BW Gas Alert Micro Clip XL and given a brand-new cutting-edge battery design, providing up to 18 hours of operation – Eight hours more than the preceding version.

The popularity of this portable gas monitor is not just due to its reliability, but also its lightweight, small design and single-button mode of operation – making it very easy to use, especially within confined spaces.

Thanks to its compact design and slim profile, the GasAlertMicroClip XL is easy to wear, whilst providing affordable standard protection from gas hazards. For a more robust solution, especially against the challenges of working in cold conditions, the BW Microclip XL is ideal and comes with extended battery life.

Both options offer continuous visual compliance indication at a glance with the green IntelliFlash™, while the easy one-button operation reduces training, and will allow workers to focus more safely on the job at hand.

You can configure the BW MicroClip XL gas detector to monitor combinations of the following: Hydrogen Sulphide (H2S), Carbon Monoxide (C0), Oxygen (O2) and Combustible LEL.

Key Features:

  • Continuous visual compliance with IntelliFlash
  • Detects up to four hazards: H2S, CO, O2 and LELs
  • Multi-gas versatility with one-button simplicity
  • Incredibly thin and lightweight, making it comfortable to wear
  • Low cost of ownership
  • Rugged and durable with the built-in concussion-proof boot
  • Powered by a lithium polymer battery
  • Manage & customize your fleet using Fleet Manager II
  • Supports English, French, German, Spanish, and Portuguese
  • Low, High STEL (short-term exposure limit)
  • TWA (time-weighted average)
  • OL (over limit) alarms
  • Visual, audible, and vibrating alarms
  • Battery life: 18 hrs / recharges in less than 6 hrs
  • MicroDock II compatible
  • Rating: IP68
  • Compatible Gas Types
  • LELs: Flammables O2: Oxygen
  • H2S: Hydrogen Sulphide CO: Carbon Monoxide
  • Click here to find out what other gas detectors, spares & accessories we have to offer; also check out our handy blog article on The Origin of Portable Gas Detectors

BW microclip xl compatible gas types

Click here to find out what other gas detectors, spares & accessories we have to offer; also check out our handy blog article on The Origin of Portable Gas Detectors.


H2S0 -100 ppm1 ppm
CO0 – 500 ppm1 ppm
0-100% LEL1%
0-5.0% v/v0.1%
Size11.3 x 6.0 x 3.2 cm / 4.4 x 2.4 x 1.2 in
Weight190 g / 6.7 oz
Temperature-20 to +50°C / -4 to +122°F
Humidity0% – 95% RH (non-condensing)
AlarmsVisual, vibrating, audible (95 dB) • Low, High, TWA, STEL, OL (over limit)
TestsAudible/visual alarms on activation; sensors, battery and circuitry (continuous)
Typical Battery Life18 hours; recharges in less than 6 hours
Note: Approximately 20% capacity loss is normal with lithium polymer batteries after 500 charge cycles. Refer to the Operator’s
Manual for additional information.
User Options• Confidence beep
• Set STEL interval
• Sensor on/off
• Latching alarms
• Safe display mode
• Stealth mode
• Calibration lock
• Auto zero on start up
• O2 auto calibration on start up
• Set bump test interval
• Force bump test when overdue
RatingsIP68 – up to 45 minutes at 1.2 m (Honeywell BW™ MicroClip XL and X3)
EMI/RFI: Complies with EMC Directive 2004/108/EC
Certifications and ApprovalsCSA: Class I, Div. 1, Gr. A, B, C, D
ATEX: , II 1 G. Ex ia IIC T4 Ga
IECEx: Ex ia IIC T4 Ga
European Conformity
KTL (Honeywell BW™ MicroClip X3 certification in progress)
WarrantyFull two‑year (Honeywell BW™ MicroClip XL) or three‑year (Honeywell BW™ MicroClip X3) warranty including all sensors
Note: Battery is guaranteed to have 12 hour runtime during warranty period under normal operating temperature of
4°F / -20°C to 122°F / 50°C
Expected Service LifetimeFive years including all sensors* (Honeywell BW™ MicroClip X3 only)
*Note: Sensors do not contain consumable components and will typically reach the expected lifetime if used according to the instructions in the user manual. Please note that poisoned sensors are not covered by warranty.


We are committed to offering the best products, at the very best rates on the market. If you can find a better offer, we will endeavour to not only match, but beat it!

To Find out more about our policy and to see how you would qualify for our price promise, click here.